Browse by Stream
QnA
Home
QnA
Go To Your Study Dashboard

Get Answers to all your Questions

header-bg qa
Filter By
Clear Filter

All Questions

A massless string connects two pulley of masses ' 2 \mathrm{~kg}' and '1 \mathrm{~kg}' respectively as shown in the figure.

The heavier pulley is fixed and free to rotate about its central axis while the other is free to rotate as well as translate. Find the acceleration of the lower pulley if the system was released from the rest. [Given, g=10 \mathrm{~m} / \mathrm{s}^2]

Option: 1

\frac{4}{3} \mathrm{~gm} / \mathrm{s}^2


Option: 2

\frac{3}{2} \mathrm{~gm} / \mathrm{s}^2


Option: 3

\frac{3}{4} \mathrm{~gm} / \mathrm{s}^2


Option: 4

\frac{2}{3} \mathrm{~gm} / \mathrm{s}^2


Not understanding sir 

View Full Answer(2)
Posted by

Raju vittal nandi

Calculate the acceleration of block m_1 of the following diagram. Assume all surfaces are frictionless . Here m1 = 100kg and m2 = 50kg

 

Option: 1

0.33m/s2


Option: 2

0.66m/s2


Option: 3

1m/s2


Option: 4

1.32m/s2


1.32

View Full Answer(4)
Posted by

balda gayathri

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

No. of transition state in given figure

Option: 1

1


Option: 2

2


Option: 3

3


Option: 4

4


2

 

View Full Answer(2)
Posted by

Mura

When cell has stalled DNA replication fork, which checkpoint should be predominantly activated?

Option: 1

G1/S

 

Option: 2

G2/M

 

 

 

Option: 3

M

 

 

Option: 4

Both G2 M and M

 

G2/M should be activated as the cell has stalled DNA replication fork.

View Full Answer(1)
Posted by

Ajit Kumar Dubey

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE

At 300 K and 1 atm, 15 mL of a gaseous hydrocarbon requires 375 mL air containing 20% O2 by volume for complete combustion.  After combustion, the gases occupy 330 mL.  Assuming that the water formed is in liquid form and the volumes were measured at the same temperature and pressure, the formula of the hydrocarbon is :
Option: 1  C4H8  
Option: 2  C4H10
Option: 3  C3H6
Option: 4  C3H8
 

Volume of N2  in air = 375 × 0.8 = 300 ml

Volume of O2 in air = 375 × 0.2 = 75 ml
 

C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml                15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

 

After combustion total volume

330 =V_{N_{2}} + V_{CO_{2}}

330 = 300 + 15x 

x = 2 

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

y = 12 

So hydrocarbon is = C2H12

None of the options matches it therefore it is a BONUS.

----------------------------------------------------------------------

Alternatively  Solution


 C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml              15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

If further information (i.e., 330 ml) is neglected, option (C3H8 ) only satisfy the above equation.

View Full Answer(1)
Posted by

Ritika Jonwal

 An ideal gas undergoes a quasi static, reversible process in which its molar heat capacity C remains constant.  If during  this process the relation of pressure P and volume V is given by PVn=constant,  then n is given by (Here CP and CV are molar specific heat at constant pressure and constant volume, respectively)
Option: 1  n=\frac{C_{p}}{C_{v}}


Option: 2  n=\frac{C-C_{p}}{C-C_{v}}


Option: 3 n=\frac{C_{p}-C}{C-C_{v}}

Option: 4  n=\frac{C-C_{v}}{C-C_{p}}
 

For a polytropic preocess

c=c_{v}+\frac{R}{1-n} \: or \: \frac{R}{1-n} = c-c_{v}

\Rightarrow 1-n=\frac{R}{c-c_{v}} \: or\: n=1-\frac{R}{c-c_{v}}

\Rightarrow n=\frac{c-\left ( c_{v}+R \right )}{c-c_{v}} = \frac{c-c_{p}}{c-c_{v}}

View Full Answer(1)
Posted by

Ritika Jonwal

NEET 2024 Most scoring concepts

    Just Study 32% of the NEET syllabus and Score up to 100% marks

A point particle of mass m, moves along the uniformly rough track PQR as shown in the figure.  The coefficient of friction, between the particle and the rough track equals µ.  The particle is released, from rest, from the point P and it comes to rest at a point R.  The energies, lost by the ball, over the parts, PQ and QR, of the track, are equal to each other, and no energy is lost when particle changes direction from PQ to QR. The values of the coefficient of friction µ and the distance x(=QR), are, respectively close to :
Option: 1  0.2 and 6.5 m  
Option: 3  0.2 and 3.5 m  
Option: 4   0.29 and 6.5 m
 

Work done by friction at QR = μmgx

In triangle, sin 30° = 1/2 = 2/PQ

PQ = 4 m

Work done by friction at PQ = μmg × cos 30° × 4 = μmg × √3/2 × 4 = 2√3μmg

Since work done by friction on parts PQ and QR are equal,

μmgx = 2√3μmg

x = 2√3 ≅ 3.5 m

Applying work energy theorem from P to R

 

decrease in P.E.=P.E.= loss of energy due to friction in PQPQ and QR

\\ m g h=(\mu m g \cos \theta) P Q+\mu m g \times Q R\\ h=\mu \cos \theta \times P Q+\mu m g \times Q R\\ h=\mu \cos \theta \times P Q+\mu \times Q R =\mu \cos 30^{\circ} \times 4+\mu \times 2 \sqrt{3} =\mu\left(4 \times \frac{\sqrt{3}}{2}+2 \sqrt{3}\right)\\ h=\mu \times 4 \sqrt{3}\\ \mu=\frac{2}{4 \sqrt{3}}=\frac{1}{2 \sqrt{3}}=0.29where h=2(given)

View Full Answer(1)
Posted by

Ritika Jonwal

In the following structure, the double bonds are marked as I, II, III and IV Geometrical isomerism is not possible at site (s) :
Option: 1  III
Option: 2  I
Option: 3  I and II
Option: 4  III and IV  
 

Geometrical isomerism is not possible at Site I as two identical methyl groups are attached to the same carbon bearing the double bond.

Hence, the answer is Option (2)

View Full Answer(1)
Posted by

vishal kumar

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

 A particle of mass m is moving along the side of a square of side ‘a’, with a uniform speed \nu in the x-y plane as shown in the figure : Which of the following statements is false for the angular momentum  \vec{L} about the
origin?
Option: 1 \vec{L}= -\frac{mv}{\sqrt{2}}R\hat{k}when the particle is moving from A to B.

Option: 2 \vec{L}= mv\left [ \frac{R}{\sqrt{2}}-a \right ]\hat{k}when the particle is moving from C to D.

Option: 3 \vec{L}= mv\left [ \frac{R}{\sqrt{2}}+a \right ]\hat{k}when the particle is moving from B to C.

Option: 4 L=\frac{R}{\sqrt{2}} m v(-k)when the particle is moving from D to A.
 

\\ In\ option\ (a), co-ordinates \ of\ A are \left(\frac{R}{\sqrt{2}}, \frac{R}{\sqrt{2}}\right) \\ \therefore \vec{r}=\left(\frac{R}{\sqrt{2}} \hat{i}+\frac{R}{\sqrt{2}} \hat{j}\right) and \vec{v}=v \hat{i}\\ \vec{L} m(\vec{r} \times \vec{v})=m\left(\frac{R}{\sqrt{2}} \hat{i}+\frac{R}{\sqrt{2}} \hat{j}\right) \times v \hat{i}\\ \vec{L}=-\frac{m R}{\sqrt{2}} v \hat{k}

\\ in\ option \ (b)\ it \ moves\ from \ C \ to\ D\\ L=\left(\frac{R}{\sqrt{2}}+a\right) m v(\hat{k})

so option b is correct option

\\ in \ option\ (c), \ For\ B$ \ to\ $C,$ \\ we have $L=\left(\frac{R}{\sqrt{2}}+a\right) m v(\hat{k})

\\ in \ option \ (d), \ When \ a \ particle\ is \ moving\ from \ D \ to\ A\\ L=\frac{R}{\sqrt{2}} m v(-k)

View Full Answer(1)
Posted by

Ritika Jonwal

 Which one of the following is an oxide ?
Option: 1  KO2
Option: 2  BaO2
Option: 3  SiO2
Option: 4 CsO2  
 

SiO2  - oxide

KO???2? , CsO????2  -  superoxides

BaO????2 -  peroxide

View Full Answer(1)
Posted by

vishal kumar

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE
filter_img