Get Answers to all your Questions

header-bg qa
Filter By

All Questions

hoping for quick and best answer

Villis are present in small intestine not in stomach because stomach doesn't absorb nutrients. 

Villi of the small intestine are small finger-like projections on the surface. One villus contains many cells and thereby increase the surface area. This is required because a lot of nutrients have to be absorbed in the small intestine. Lots of cells on a small area makes this process efficient as, stomach collects the food, adds gastric acid and enzymes for digestion of food. The stomach does not absorb any nutrients and therefore does not require a larger surface area.

View Full Answer(1)
Posted by

Priyanka Kumari

For the reaction:

X_{2}O_{4}\left ( l \right )\rightarrow 2XO_{2}(g)

\Delta U=2.1k \ cal, \Delta S=20 cal\ K^{-1}  at 300K

Hence \Delta G is :-

  • Option 1)

    2.7k cal

  • Option 2)

    -2.7 k cal

  • Option 3)

    9.3k cal

  • Option 4)

    -9.3k cal

 

 

Molar heat capacity for isobaric process C(p) -

dH=n\: C_{P}\: dT
 

- wherein

dH=dE+d(PV)

or

dH=dE+n\, R\, dT

 

 \Delta H= \Delta U + \Delta n_{g}RT

Given, \Delta U=2.1 Kcal\;\;\;\; \Delta n_{g}=2

R- 2 \times 10^{-3}Kcal;\;\;T=300 K

\therefore \Delta H= 2.1+2 \times 2 \times 10^{-3} \times 300=3.3 Kcal

Also, \Delta G= \Delta H-T \Delta S

Given, \Delta S=20 \times 10^{-3}Kcal\;K^{-1}

On putting the value of \Delta H and \Delta S in the equation, we get - 

\Delta G = 3.3-300 \times 20 \times 10^{-3}= -2.7 Kcal

 


Option 1)

2.7k cal

This option is incorrect.

Option 2)

-2.7 k cal

This option is correct.

Option 3)

9.3k cal

This option is incorrect.

Option 4)

-9.3k cal

This option is incorrect.

View Full Answer(1)
Posted by

Plabita

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

A thermodynamic system undergoes cyclic process ABCDA as shown in fig. the work done by the system in the cycle is:

  • Option 1)

    P_{o}V_{o}

  • Option 2)

    2P_{o}V_{o}

  • Option 3)

    \frac{P_{o}V_{o}}{2}

  • Option 4)

    Zero

 

Using

Cyclic Process -

A cyclic process consist of a number of changes that return the system back to its initial state.

 

- wherein

in cyclic process Delta U= 0

 

 Work done in cyclic process = Area of the cycle

In the upper half, cycle is anti-clockwise while in lower half it is clockwise. Hence, net work done is zero.


Option 1)

P_{o}V_{o}

This option is incorrect

Option 2)

2P_{o}V_{o}

This option is incorrect

Option 3)

\frac{P_{o}V_{o}}{2}

This option is incorrect

Option 4)

Zero

This option is correct

View Full Answer(1)
Posted by

divya.saini

A monoatomic gas at a pressure P, having a volume V expands isothermally to a volume 2 V, and then adiabatically to a volume 16 V. the final pressure of the gas is: 

take\:\:\left( \gamma= \frac{5}{3} \right ) 

  • Option 1)

    64 P

  • Option 2)

    32 P

  • Option 3)

    \frac{P}{64}

  • Option 4)

    16 P

 

As learnt in

Equation of state -

dQ= 0

n, C_{V}, dT+PdV= 0
 

- wherein

On solving

gamma frac{dV}{V}+frac{dP}{P}= 0

Rightarrow PV^{gamma }= constant

 

 For Isothermal expansion,

P_{i}= P, \ V_{i}= V,\ V_{1}= 2V\ \ \Rightarrow P_{1} =P_{i}\cdot \frac{V}{2V}= \frac{P}{2}

For adiabatic expansion,

P_{1}= \frac{P}{2},\ V_{1}=2V,\ V_{f}= 16V,\ P_{f} =?

PV^{\gamma }= \ constant

\Rightarrow P_{1}V_{1}^{\gamma } = P_{f}V_{f}^{\gamma }\ \ \Rightarrow P_{f}= P_{1}\cdot \left ( \frac{V_{1}}{V_{f}} \right )^{\gamma }

P_{f}= \frac{P}{2}\cdot \left ( \frac{2V}{16V} \right )^{\frac{5}{3}} = \frac{P}{2}\cdot \left ( \frac{1}{2} \right )^{5} = \frac{P}{64} 


Option 1)

64 P

This option is incorrect

Option 2)

32 P

This option is incorrect

Option 3)

\frac{P}{64}

This option is correct

Option 4)

16 P

This option is incorrect

View Full Answer(1)
Posted by

prateek

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE

A body of mass (4m) is lying in x-y plane at rest. It suddenly explodes into three pieces. Two pieces, each of mass (m) move perpendicular to each other with equal speeds (V). The total Kinetic energy generated due to explosion is

  • Option 1)

    mV^{2}

  • Option 2)

    \frac{3}{2} mV^{2}

  • Option 3)

    2 mV^{2}

  • Option 4)

    4 mV^{2}

 

seems logical .we assume that the 3rd part ie mass 2m goes in (-x-y) plane though the problem does not specify.How to explain that mass 2m does not move in Z direction?

View Full Answer(2)
Posted by

v muralidharan

Steam at 100o C is passed into 20 g of water at 10o C. When water acquires a temperature of 80o C, the mass of water present will be:

[Take specific heat of water = 1 cal g-1 oC -1 and latent heat of steam = 540 cal g-1]

  • Option 1)

    24 g

  • Option 2)

    31.5 g

  • Option 3)

    42.5 g

  • Option 4)

    22.5 g

 

As discussed in

Specific Heat -

Amount of heat(Q) required to raise the temperature of unit mass through 1oC.

- wherein

Units-Calories/gm	imes ^{o}C

 

Specific heat of water S_{w} = 1 \:\:cal\:\: g^{-1} \:\: ^{\circ} C^{-1}

Latent heat of steam L_{s}= 540 \:\: cal \:\: g^{-1}

Q_{1} = mL_{s}+mS_{w} \Delta T_{w} = m\times 540+m\times 1\times \left | 100-80 \right |

= 540m+20m = 560 m

Heat gained by 20g of water to change its temperature from 10^{\circ}C to 80^{\circ}C

Q_{2} = m_{w}S_{w}\Delta T_{w} = 20\times 1\times \left | 80-10 \right | = 1400

According to principle of calorimetry Q_{1} = Q_{2}

\therefore 5600w = 1400 or w = 2.5g

total mass of water = = (20+m)g = (20+2.5)g= 22.5 g


Option 1)

24 g

This solution is incorrect

Option 2)

31.5 g

This solution is incorrect

Option 3)

42.5 g

This solution is incorrect

Option 4)

22.5 g

This solution is correct

View Full Answer(1)
Posted by

Vakul

NEET 2024 Most scoring concepts

    Just Study 32% of the NEET syllabus and Score up to 100% marks


Copper of fixed volume 'V' is drawn into wire of length 'l'. When this wire is subjected to a constant force'F', the extension produced in the wire is '\Delta l' . Which of the following graphs is a straight line?

 

  • Option 1)

    \Delta l \:versus\:\frac{1}{l}

  • Option 2)

    \Delta l \:versus\:l^{2}

  • Option 3)

    \Delta l \:versus\:\frac{1}{l^{2}}

  • Option 4)

    \Delta l \:versus\:l

 

As discussed in

Young Modulus -

Ratio of normal stress to longitudnal strain

it denoted by Y

Y= frac{Normal : stress}{longitudnal: strain}

- wherein

Y=frac{F/A}{Delta l/L}

F -  applied force

A -  Area

Delta l -  Change in lenght

l - original length

 

 

 

 v = Al

Y = \frac{F/A}{\Delta l/l} = \frac{Fl}{A.\Delta L} \Rightarrow \Delta l = \frac{Fl}{YA}

\Delta l = \frac{Fl^{2}}{YV} \Rightarrow \Delta l \propto l^{2} 


Option 1)

\Delta l \:versus\:\frac{1}{l}

This solution is incorrect

Option 2)

\Delta l \:versus\:l^{2}

This solution is correct

Option 3)

\Delta l \:versus\:\frac{1}{l^{2}}

This solution is incorrect

Option 4)

\Delta l \:versus\:l

This solution is incorrect

View Full Answer(1)
Posted by

Vakul

A certain number of spherical drops of a liquid of radius 'r' coalesce to form a single drop of radius 'R' and volume 'V'. If 'T' is the surface tension of the liquid, then:

 

  • Option 1)

    energy =4VT \left( \frac{1}{r}- \frac{1}{R} \right )is\:\:released

  • Option 2)

    energy =3VT \left( \frac{1}{r}+ \frac{1}{R} \right )is\:\:absorbed

  • Option 3)

    energy =3VT \left( \frac{1}{r}- \frac{1}{R} \right )is\:\:released

  • Option 4)

    Energy is neither released nor absorbed.

 

As discussed

Surface Energy -

It is defined as the amount of work done in increasing the area of the liquid against surface tension.

-

 

 As surface area decreases so energy is released energy released = 4 \pi R^{2}T \left [ n^{\frac{1}{3}}-1 \right ]

R= n^{\frac{1}{3}}r

= 4 \pi R^{2}T\left [ \frac{1}{r} - \frac{1}{R}\right ] = 3 v \left [ \frac{1}{r}-\frac{1}{R} \right ]


Option 1)

energy =4VT \left( \frac{1}{r}- \frac{1}{R} \right )is\:\:released

This solution is incorrect

Option 2)

energy =3VT \left( \frac{1}{r}+ \frac{1}{R} \right )is\:\:absorbed

This solution is incorrect

Option 3)

energy =3VT \left( \frac{1}{r}- \frac{1}{R} \right )is\:\:released

This solution is correct

Option 4)

Energy is neither released nor absorbed.

This solution is incorrect

View Full Answer(1)
Posted by

perimeter

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

If the focal length of objective lens is increased then magnefying power of:

  • Option 1)

    microscope will increase but that of telescope decrease.

  • Option 2)

    microscope and telescope both will increase.

  • Option 3)

    microscope and telescope both will decrease.

  • Option 4)

    microscope will decrease but that of telescope increase.

 

 

Compound Microscope -

m= -frac{v_{o}}{u_{o}}cdot frac{D}{u_{e}}
 

- wherein

v_{o}, and , u_{o} is distance from objective.

u_{e} Distance from eyepiece.

Maximum magnification m= -frac{v_{o}}{u_{0}}left ( 1+frac{D}{f_{e}} 
ight )

 

 

Astronomical Telescope -

m= frac{-f_{o}}{f_{e}}left ( 1+frac{f_{e}}{D} 
ight )
 

- wherein

f_{o} = focal length of objective

f_{e}= focal length of eyepiece

 

 For microscope magnifying power \propto \frac{1}{fo}

For telescope magnifying power \propto fo

\therefore magnifying power of microscope decreases and that of telescope increases


Option 1)

microscope will increase but that of telescope decrease.

This option is incorrect 

Option 2)

microscope and telescope both will increase.

This option is incorrect 

Option 3)

microscope and telescope both will decrease.

This option is incorrect 

Option 4)

microscope will decrease but that of telescope increase.

This option is correct 

View Full Answer(1)
Posted by

subam

In the Young's double-slit experiment, the intensity of light at a point on the screen where the path difference is \lambda is K, (\lambda being the wave length of light used). The intensity at a point where the path difference is \frac{\lambda }{4}, will be:

  • Option 1)

    K

  • Option 2)

    \frac{K}{4}

  • Option 3)

    \frac{K}{2}

  • Option 4)

    Zero

 

 

Resultant Intensity of two wave -

I= I_{1}+I_{2}+2sqrt{I_{1}I_{2}}cos 	heta

- wherein

I_{1}= Intencity of wave 1

I_{2}= Intencity of wave 2

	heta = Phase difference

 

 

 at a point where path difference is \lambda=>phase difference =2\pi

\therefore I_{R}=K-(\sqrt{I_{1}}+\sqrt{I_{2}})^{2}

\therefore I_{R}=K-(\sqrt{I_{1}}+\sqrt{I_{2}})^{2}=>K=4 I-----------------(1)

(I_{1} = I_{2}=I)

When path a difference is \frac{\lambda}{4}

=> phase difference =\frac{\pi}{2}

I_{R}=I_{1} + I_{2} = 2I=\frac{k}{2}


Option 1)

K

This option is incorrect 

Option 2)

\frac{K}{4}

This option is incorrect 

Option 3)

\frac{K}{2}

This option is correct 

Option 4)

Zero

This option is incorrect 

View Full Answer(1)
Posted by

subam

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE

filter_img