Browse by Stream
QnA
Home
QnA
Go To Your Study Dashboard

Get Answers to all your Questions

header-bg qa
Filter By
Clear Filter

All Questions

 A first order reaction takes 30 minute for 20% decomposition \mathrm{t_\mathrm{1/2}} for the reaction is approx.. 

 

Option: 1

66 min 


Option: 2

93 min


Option: 3

116 min


Option: 4

Infinite time


t1/2=99min

View Full Answer(2)
Posted by

Kartik

In a one component second order reaction,if the concentration of the reactant is reduced to half , the rate

Option: 1

increases two times


Option: 2

increases four times


Option: 3

decreases to one half


Option: 4

decreases to one fourth


List the similarities and difference between Aerobis and Anaerobis respiration

View Full Answer(2)
Posted by

Paban Sharma

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

A massless string connects two pulley of masses ' 2 \mathrm{~kg}' and '1 \mathrm{~kg}' respectively as shown in the figure.

The heavier pulley is fixed and free to rotate about its central axis while the other is free to rotate as well as translate. Find the acceleration of the lower pulley if the system was released from the rest. [Given, g=10 \mathrm{~m} / \mathrm{s}^2]

Option: 1

\frac{4}{3} \mathrm{~gm} / \mathrm{s}^2


Option: 2

\frac{3}{2} \mathrm{~gm} / \mathrm{s}^2


Option: 3

\frac{3}{4} \mathrm{~gm} / \mathrm{s}^2


Option: 4

\frac{2}{3} \mathrm{~gm} / \mathrm{s}^2


3/4gm/s2

 

View Full Answer(3)
Posted by

Guru G

Calculate the acceleration of block m_1 of the following diagram. Assume all surfaces are frictionless . Here m1 = 100kg and m2 = 50kg

 

Option: 1

0.33m/s2


Option: 2

0.66m/s2


Option: 3

1m/s2


Option: 4

1.32m/s2


0.66m/s2

View Full Answer(5)
Posted by

Guru G

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE

No. of transition state in given figure

Option: 1

1


Option: 2

2


Option: 3

3


Option: 4

4


2

 

View Full Answer(2)
Posted by

Mura

When cell has stalled DNA replication fork, which checkpoint should be predominantly activated?

Option: 1

G1/S

 

Option: 2

G2/M

 

 

 

Option: 3

M

 

 

Option: 4

Both G2 M and M

 

G2/M should be activated as the cell has stalled DNA replication fork.

View Full Answer(1)
Posted by

Ajit Kumar Dubey

NEET 2024 Most scoring concepts

    Just Study 32% of the NEET syllabus and Score up to 100% marks

A 100 \; m long wire having cross-sectional area 6.25 \times 10^{-4}m^{2} and Young's modulus is 10^{10}Nm^{-2}  subjected to a load of 250\; N, then the elongation in the wire will be:
Option: 1 4 \times 10^{-3} \mathrm{~m}
Option: 2 6.25 \times 10^{-3} \mathrm{~m}
Option: 3 6.25 \times 10^{-6} \mathrm{~m}
Option: 4 4 \times 10^{-4} \mathrm{~m}

\begin{aligned} & \text { Stress }=\mathrm{y} \text { strain } \Rightarrow \frac{W}{\mathrm{~A}}=\mathrm{y} \frac{\Delta \ell}{\ell} \\ & \Delta \ell=\frac{\mathrm{W} \ell}{\mathrm{yA}} \Rightarrow \Delta \ell=\frac{250 \times 100}{10^{10} \times 6.25 \times 10^{-4}} \\ & \Delta \ell=4 \times 10^{-3} \mathrm{~m} \end{aligned}

Hence, the correct answer is option 1

View Full Answer(1)
Posted by

rishi.raj

A circular loop of radius r is carrying current I\; A. The ratio of the magnetic field at the center of circular loop and at a distance r from the center of the loop on its axis is:
Option: 1 2 \sqrt{2}: 1
Option: 2 1: 3 \sqrt{2}
Option: 3 1: \sqrt{2}
Option: 4 3 \sqrt{2}: 2

Magnetic field at centre of coil B_1=\frac{\mu_0 I}{2 r}

on the axis at

 x=r \Rightarrow B_2=\frac{\mu_0 \mathrm{Ir}^2}{2\left(r^2+x^2\right)^{3 / 2}}

\begin{aligned} & \mathrm{B}_2=\frac{\mu_0 \mathrm{Ir}^2}{2\left(\mathrm{r}^2+\mathrm{r}^2\right)^{3 / 2}} \\ & \mathrm{~B}_2=\frac{\mu_0 \mathrm{I}}{2(2 \sqrt{2} r)} \\ & \frac{\mathrm{B}_1}{\mathrm{~B}_2}=2 \sqrt{2} \end{aligned}

\(2 \sqrt{2}: 1\)

 

View Full Answer(1)
Posted by

rishi.raj

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

At 300 K and 1 atm, 15 mL of a gaseous hydrocarbon requires 375 mL air containing 20% O2 by volume for complete combustion.  After combustion, the gases occupy 330 mL.  Assuming that the water formed is in liquid form and the volumes were measured at the same temperature and pressure, the formula of the hydrocarbon is :
Option: 1  C4H8  
Option: 2  C4H10
Option: 3  C3H6
Option: 4  C3H8
 

Volume of N2  in air = 375 × 0.8 = 300 ml

Volume of O2 in air = 375 × 0.2 = 75 ml
 

C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml                15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

 

After combustion total volume

330 =V_{N_{2}} + V_{CO_{2}}

330 = 300 + 15x 

x = 2 

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

y = 12 

So hydrocarbon is = C2H12

None of the options matches it therefore it is a BONUS.

----------------------------------------------------------------------

Alternatively  Solution


 C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml              15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

If further information (i.e., 330 ml) is neglected, option (C3H8 ) only satisfy the above equation.

View Full Answer(1)
Posted by

Ritika Jonwal

The heats of combustion of carbon and carbon monoxide are −393.5 and −283.5 kJ mol−1, respectively.  The heat of formation (in kJ) of carbon monoxide per mole is:
Option: 1 110.5
Option: 2 676.5
Option: 3 -676.5
Option: 4 -110
 

\mathrm{C_s+O_2_g \rightarrow CO_2_g \: \: \: \: \Delta H= -393.5 KJmol^{-1}}

CO_{\left ( g \right )}+\frac{1}{2}O_{2} \: _{\left ( g \right )}\rightarrow CO_{2} \:_{(g)} \: \: \: \: \: \Delta H=-283.5 kJmol^{-1}

C_{\left ( s \right )}+\frac{1}{2}O_{2} \:_{\left ( g \right )}\rightarrow CO_{\left ( g \right )}

\therefore \Delta H= -393.5+283.5

            = -110.0\ kJmol^{-1}

Therefore, Option(4) is correct

View Full Answer(1)
Posted by

Ritika Jonwal

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE
filter_img