Browse by Stream
QnA
Home
QnA
Go To Your Study Dashboard

Get Answers to all your Questions

header-bg qa
Filter By
Clear Filter

All Questions

Locus of the midpoint of any focal chord of \mathrm{y}^2=4 \mathrm{ax} is
 

Option: 1

\mathrm{y}^2=\mathrm{a}(\mathrm{x}-2 \mathrm{a})
 


Option: 2

\mathrm{y}^2=2 \mathrm{a}(\mathrm{x}-2 \mathrm{a})

 


Option: 3

\mathrm{y}^2=2 \mathrm{a}(\mathrm{x}-\mathrm{a})
 


Option: 4

\text{None of these}


Let the midpoint be \mathrm{P}(\mathrm{h}, \mathrm{k}). Equation of this chord is \mathrm{\mathrm{T}=\mathrm{S}_1}. i.e., \mathrm{\mathrm{yk}-2 \mathrm{a}(\mathrm{x}+\mathrm{h})=\mathrm{k}^2-4 \mathrm{ah}}. It must pass through (\mathrm{a}, 0)

\mathrm{\Rightarrow 2 \mathrm{a}(\mathrm{a}+\mathrm{h})=\mathrm{k}^2-4 \mathrm{ah}}. Thus required locus is \mathrm{\mathrm{y}^2=2 \mathrm{ax}-2 \mathrm{a}^2.}

Hence option 2 is correct.

 

View Full Answer(1)
Posted by

SANGALDEEP SINGH

A massless string connects two pulley of masses ' 2 \mathrm{~kg}' and '1 \mathrm{~kg}' respectively as shown in the figure.

The heavier pulley is fixed and free to rotate about its central axis while the other is free to rotate as well as translate. Find the acceleration of the lower pulley if the system was released from the rest. [Given, g=10 \mathrm{~m} / \mathrm{s}^2]

Option: 1

\frac{4}{3} \mathrm{~gm} / \mathrm{s}^2


Option: 2

\frac{3}{2} \mathrm{~gm} / \mathrm{s}^2


Option: 3

\frac{3}{4} \mathrm{~gm} / \mathrm{s}^2


Option: 4

\frac{2}{3} \mathrm{~gm} / \mathrm{s}^2


3/4gm/s2

 

View Full Answer(3)
Posted by

Guru G

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

Calculate the acceleration of block m_1 of the following diagram. Assume all surfaces are frictionless . Here m1 = 100kg and m2 = 50kg

 

Option: 1

0.33m/s2


Option: 2

0.66m/s2


Option: 3

1m/s2


Option: 4

1.32m/s2


0.66m/s2

View Full Answer(5)
Posted by

Guru G

Mercury in water changes to soluble

Option: 1

Dimethyl mercury


Option: 2

diethyl mercury


Option: 3

Hg_2Cl_2


Option: 4

None of these


2

View Full Answer(2)
Posted by

Karumudi.santhoshreddy

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE

No. of transition state in given figure

Option: 1

1


Option: 2

2


Option: 3

3


Option: 4

4


2

 

View Full Answer(2)
Posted by

Mura

When cell has stalled DNA replication fork, which checkpoint should be predominantly activated?

Option: 1

G1/S

 

Option: 2

G2/M

 

 

 

Option: 3

M

 

 

Option: 4

Both G2 M and M

 

G2/M should be activated as the cell has stalled DNA replication fork.

View Full Answer(1)
Posted by

Ajit Kumar Dubey

NEET 2024 Most scoring concepts

    Just Study 32% of the NEET syllabus and Score up to 100% marks

A 100 \; m long wire having cross-sectional area 6.25 \times 10^{-4}m^{2} and Young's modulus is 10^{10}Nm^{-2}  subjected to a load of 250\; N, then the elongation in the wire will be:
Option: 1 4 \times 10^{-3} \mathrm{~m}
Option: 2 6.25 \times 10^{-3} \mathrm{~m}
Option: 3 6.25 \times 10^{-6} \mathrm{~m}
Option: 4 4 \times 10^{-4} \mathrm{~m}

\begin{aligned} & \text { Stress }=\mathrm{y} \text { strain } \Rightarrow \frac{W}{\mathrm{~A}}=\mathrm{y} \frac{\Delta \ell}{\ell} \\ & \Delta \ell=\frac{\mathrm{W} \ell}{\mathrm{yA}} \Rightarrow \Delta \ell=\frac{250 \times 100}{10^{10} \times 6.25 \times 10^{-4}} \\ & \Delta \ell=4 \times 10^{-3} \mathrm{~m} \end{aligned}

Hence, the correct answer is option 1

View Full Answer(1)
Posted by

rishi.raj

A circular loop of radius r is carrying current I\; A. The ratio of the magnetic field at the center of circular loop and at a distance r from the center of the loop on its axis is:
Option: 1 2 \sqrt{2}: 1
Option: 2 1: 3 \sqrt{2}
Option: 3 1: \sqrt{2}
Option: 4 3 \sqrt{2}: 2

Magnetic field at centre of coil B_1=\frac{\mu_0 I}{2 r}

on the axis at

 x=r \Rightarrow B_2=\frac{\mu_0 \mathrm{Ir}^2}{2\left(r^2+x^2\right)^{3 / 2}}

\begin{aligned} & \mathrm{B}_2=\frac{\mu_0 \mathrm{Ir}^2}{2\left(\mathrm{r}^2+\mathrm{r}^2\right)^{3 / 2}} \\ & \mathrm{~B}_2=\frac{\mu_0 \mathrm{I}}{2(2 \sqrt{2} r)} \\ & \frac{\mathrm{B}_1}{\mathrm{~B}_2}=2 \sqrt{2} \end{aligned}

\(2 \sqrt{2}: 1\)

 

View Full Answer(1)
Posted by

rishi.raj

Crack CUET with india's "Best Teachers"

  • HD Video Lectures
  • Unlimited Mock Tests
  • Faculty Support
cuet_ads

At 300 K and 1 atm, 15 mL of a gaseous hydrocarbon requires 375 mL air containing 20% O2 by volume for complete combustion.  After combustion, the gases occupy 330 mL.  Assuming that the water formed is in liquid form and the volumes were measured at the same temperature and pressure, the formula of the hydrocarbon is :
Option: 1  C4H8  
Option: 2  C4H10
Option: 3  C3H6
Option: 4  C3H8
 

Volume of N2  in air = 375 × 0.8 = 300 ml

Volume of O2 in air = 375 × 0.2 = 75 ml
 

C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml                15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

 

After combustion total volume

330 =V_{N_{2}} + V_{CO_{2}}

330 = 300 + 15x 

x = 2 

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

y = 12 

So hydrocarbon is = C2H12

None of the options matches it therefore it is a BONUS.

----------------------------------------------------------------------

Alternatively  Solution


 C_{x}H_{y} +\left ( x +\frac{y}{4} \right )O_{2} \; \rightarrow \; xCO_{2}(g) + \frac{y}{2} H_{2}O(l)

15ml              15\left ( x +\frac{y}{4} \right )

  0                         0                            15x                 -

Volume of O2 used

15\left ( x +\frac{y}{4} \right ) = 75

\left ( x +\frac{y}{4} \right ) = 5

If further information (i.e., 330 ml) is neglected, option (C3H8 ) only satisfy the above equation.

View Full Answer(1)
Posted by

Ritika Jonwal

Which of the following is an anionic detergent?
Option: 1 Sodium stearate
Option: 2 Sodium lauryl sulphate
Option: 3 Cetyltrimethyl ammonium bromide
Option: 4 Glyceryl oleate

As we have learned

Phenol formation from Benzenesulphonic acid -

Acidification of sodium salt gives phenol.

- wherein

C_{6}H_{5}SO_{3}Na+NaOH\xrightarrow[HCl]{fuse}C_{6}H_{5}-OH+Na_{2}SO_{3}

 

 

 Sodium lauryl sulphate has anionic charge 

 

 

 

 

View Full Answer(1)
Posted by

Ritika Jonwal

JEE Main high-scoring chapters and topics

Study 40% syllabus and score up to 100% marks in JEE
filter_img